You simply slide this unit over the steering tube. This gives your scooter a distinguished look and you have very good lighting at night, which makes this a very safe accessory. It fits on the Micro 200mm scooters.

Q: How do I fit my tube light?
A: This LED tube is a rigid plastic tube that fits over the bottom stem of the scooter. To install it, first loosen the handlebar clamp:

1. Loosen the small screw on the back of the clamp with a 3mm Allen key
2. Loosen the large bolt with a 5mm Allen key
3. Push the clamp up and away from the steerer tube, and pull out the upper part of the handlebar
   
   Then slide the tube light onto the lower handlebar tube and align the hole in the tube light with the height adjustment knob. Then replace the upper handlebars in reverse order. Make sure the clamp is tight enough so that the handlebars can remain at any height.

Q: Do I need batteries?
A: The tube light requires 2 x AAA batteries. To fit the batteries, undo the small screw on the back of tube and lift the end of the battery compartment cover to insert the batteries. Close the cover, secure the screw then turn on the light by pressing blue square button on back of the tube.