Scooting is even more fun with these LED wheels. They light up white in the dark, which gives a magic effect and makes your child extra visible. The LED light are motion activated. The wheels have transparant PU and come in a version with black spokes.

Suitable for: all Maxi Micro scooters except the Maxi Pro

INSTRUCTIONS:

The left wheel (viewed from above) has a bolt that loosens clockwise. This can be recognized by a line in the Allen hole. The right wheel has a normally loosening bolt.

Place one of the included Allen keys on the back of the wheel and use a wrench for the front to loosen the bolt. See picture above.

Please note: Do you have an older type of scooter with a completely round bolt on the front of the wheel? Then we recommend the following:

1) Remove the cover. This is secured with 8 black screws. When replacing, remember that the 4 longer screws should be in the middle and the shorter ones at the ends.

2) Unscrew the front bolts (which protrude through the bottom plate). A less strong location was used for these bolts. You can easily get these loose with two good Allen keys. And also unscrew the two small nuts on the handlebar. You can then remove the skid plate to make it easier to get to the bolt at the back of the wheel.

3) Secure the new wheels to the suspension. Remember that the left-hand tightening bolt is placed on the left-hand suspension. This is the bolt with the line in the screw hole.